Home Products Pipeline Rehabilitation Internal Coating

Internal Coating

Internal Coating

Coating plants for spraying in the field intended to apply a protective coating on the pipe inner surface acting.

 

Description

459 (459.220.1 )

459 (459.220.2 )

459S (459.220.3 )

459S (459.220.4 )

 

General description

Standard trailer

Standard trailer with oversize tanks for material

Install on the sled with 200 l tanks

Extra-long trailer with oversize tanks for the material and the alternator.

1

Steel chassis/frame trailer with aluminium body panels

Body dimensions 3.0 x 2.1 x 2.1 m (ДШВ) + tugboat

The total weight of 4500 kg without material

Body dimensions 3.0 x 2.1 x 2.1 m (ДШВ) + tugboat

The total weight of 6000 kg without material

 

Runner dimensions 3.5 x 2.1 x 2.0 m (ДШВ)

The total weight of 4000 kg without material

Body dimensions 5.0 x 2.1 x 2.3 m (ДШВ) + tugboat

The total weight of 8000 kg

The composition - the alternator

2

Tanks for the material; stainless steel, with isolation and caps.

A (Activator).

(B) (the main component).

The tank may have an impact on the overall size.

Pressurize the protective gas for moisture-sensitive materials; stitch holes for measurements

Total capacity: 300 l

 

100 l

200 l

Total capacity: 600 l

 

200 l

400 l

Total capacity: 600 l

 

200 l

2x200 l (400 l)

Total capacity: 750 l

 

250 l

2x250 l (500 l)

3

Heating tank.

A.) oil circulation or

(b.) Self-adhesive heating pads, depending on customer's guidelines.

 

1.5 KW for tank A, 3 kw for tank B

 

1.5 KW for tank A, 3 kw for tank B

 

2 Kw for the tank A, 2 kw for each tank (B

 

2 Kw for the tank A, 2 kw for each tank (B

4

Agitator Drive the tank cover to the main component and the blade agitator assembly

Standard: geared motor power 0.5 KW

Standard: geared motor power 0.5 KW

Standard for tanks (B. 
Geared motor power 0.5 KW

Standard: geared motor power 0.5 KW

5

The supply pump 105/09/T06, pressure ratio 9:1

1 x A 2 x B

1 x A 2 x B

1 x A 2 x B

1 x A 2 x B

6

The inlet filter for the tank and the inlet filter/screen low pressure

1" Supply Hose

1" Supply Hose

1" Supply Hose

1" Charge

Hose

7

The metering pump to supply a multicomponent mixture with the installation in the selected location. (Standard dimensions and parameters)

Pressure ratio from 1:1 to 9:1 with a specific step growth

 

Mixing Ratio

The metering pump

Pressure Ratio

Pump Type

The volume over the cycle (l)

Performance 20cycles (l/min)

Maximum 428 bar (6000 psi)

459

2.5 :1

450

56:1

98-95-98

0.65

13.06

From 1.25 l/min to 12.0 l/min depending on the type of material

 

2:1

450

52:1

98-98-98

0.69

13.93

 

1:1

450

79:1

98-CBR '98

0.49

9.29

459

HP

2.5 :1 high-pressure

450

:1

94-93-94

0.43

8.60

From 1.0 l/min to 8.0 l/min depending on the type of material

 

 

 

459

8

Output pressure gauge high-pressure and high-pressure relief valve

High-pressure relief valve 7500 lb. /sq. in.

9

The device heating high-pressure seawater fluid in the kit with the thermostat

Optional, optional: 2 x 240 in 3 kw each, with a limit 60C

10

High-pressure filter assembly in supplied with drain and oxidizing gases

3

11

The Panel monitoring the flow rate in the kit with septic tanks and the sensors

1 On the system of the 3 lines

 

12

Rotary connection with high-pressure seals and segmented structure to supply materials from pumping system in an integral hose on a rotating drum.

6 Port ½" , max. air bag. operating pressure 428 bar at 60 C

(2) port B to flow in the hose with a high flow)

13

Wellhead equipment link back to heater and recirculation 2 components

Unified part

14

Drum for hose

The electric winch, expansion valve and electronic conversion speed and torque.

Traction and control cylinder

Capacity 270 m x 67mm

 The motor 4 kw

Speed range from 1 to 6 m/min.

(3' - 20 ')

 

The Force rewind 5 000 kg

15

Heated an integral hose (hot water), diameter and length:

Standard: 67 mm / 230 m

A 1/2-inch hose.  

Hose B 5/8"  

The air hose 5/8"

16

Tank for hot water and heating element heater

6 Kw 240, and the water pump high pressure

17

The Mechanism styling hose

A fully automated system, the mechanism styling with two helical screws

18

Curved tray assembly for the establishment of safe bend radius hose when descending into the ditch

The Radius 900 mm

19

The connecting hoses A, B, and air wrapping for air recirculation system in heated water

Unified part

20

The mixer with a Y-shaped connector

Disposable mixers

21

 

Spraying head PC100 assembly with carriage for pipes with a diameter:

75 - 300 mm (3" - 12 ")

22

Spraying head PC150 assembly with carriage for pipes with a diameter:

250 - 450 mm (10" - 18 ")

23

Spraying head PC250 assembly with carriage for pipes with a diameter:

350 mm - 1000 mm (14" - 39 ")

24

Electrical control panel supplied with splice, fuses and the control circuit

Unit size 800x600x300

25

Control panel computer

The company has developed and adopted in a computer system in combination with keyboard and printer, equipped with its own memory block, voice recognition system errors, and support for remote access.

Different access levels and categories of users.

Unit size 600x600x300 with colour display 375 mm (15 " ).

Includes a modem GSM/GPRS roaming.

26

The compressed air supply with control panel

Pressure 8 bar, 8 m3/min (115 lb. /sq. inch, 250 cu. ft in mines.)

27

Mounting and support equipment, marking, leadership and first aid kit

28

Optional: a built-in diesel-generator: 1500 rpm., 4 cylinder diesel engine.

Fuel tank capacity/flow:

30 KVA, 380/440 V or 220/240 V AC.

110/120 V, 50 Hz or 60 Hz

 

80 L/10 hours at 75% load

29

Other additional and optional equipment

 

 

The compressors and generators of all sizes; tanks increased; levelling system using the hydraulic cylinders; automatic stacking hose; rinse pump; service winch; a set of tools and spare parts kits; resistance makes tantalum head larger in size with carriages

Inertia rollers to work with large diameter tubes

 

 

Technical parameters may be changed without prior notice

 

 

 

Back to products list